Welded mesh perimeter fence

Fence specification

  1. Manufactured from bright drawn mild steel to ASTM A 853-93, the mesh is electrically welded at each intersection.
  2. Hot dip galvanized steel to min 460 g/m2.
  3. Welded mesh size is 2" × 2", gauge 8, should be in roll form (not panel form) please ensure the roll form (fence height) should be height or width with minimum 2.6 m or maximum 3.0 m.
  4. Finished section should be resistant to corrosion by giving a zinc coating in excess of ASTM A 641-92 class 3.

Fence materials

  1. Posts
    • Posts shall be hot dip galvanized circular of heavy hollow steel section diameter 3 inch (outer size) conforming to the requirement of ASTM F669.
    • Height of the post is 3.5 m (3 meter for vertical welded mesh and 0.5 m) embedded on concrete foundation post. Galvanized corbel will be fixed on top of post to install coiled razor 0.6 meter diameter.
  2. Rails (horizontal members on top and bottom)
    • Rail shall be hot dip galvanized steel heavy hollow circular steel, conformed to the requirement of ASTM F669.
    • The cross section of diameter 50 mm, thickness, and total length 3 meters.
  3. Welded Mesh
    • Hot dip galvanized weld mesh (min 460 g/m2), galvanized steel mesh from heavily galvanized conformed to ASTM A 641 class.
    • Size 1.5" × 1.5" × (8 gauge).
    • 2" × 2" × (8 gauges) may be used as option item.
    • Strand that form the mesh are electrically welded at each intersection.
    • Finished section shall be resistant to corrosion by being hot dip galvanized, which gives a zinc coating in excess of ASTM A 641-92 class 3.

Inquiry for Our Product

Anping Tuofang Metal Product Co., Ltd.
E-mail: info@wirefencetrade.com

When you contact us, please provide your detail requirements.
That will help us give you a valid quotation.